|Home||» Products||» Hot & Cold Water Dispenser||» Hot Water Dispenser|
Hot Cold Water Dispenser with RO
With the aid of our in-house facilities, we are competent to bring forth an exclusive array of Hot Cold Water Dispenser with RO for our respected patrons. Our quality controllers are properly checking the entire assortment of water dispenser on various quality parameters such as durability, quality and proper water purification. Our offered Hot Cold Water Dispenser with RO is a perfect combination of five stage RO system & water dispenser appropriate for office or home.
Five Level Purification Process (Reverse Osmosis Filtration)
Level 1: 5 micron-spun filter, removes the Physical & Suspended Impurities such as Sand, Silt, Dust, Rust, Hair etc.
Level 2: Granular Activated Carbon (GAC) removes the colour & free chlorine in the water and also absorbs the Organic impurities on its surface.
Level 3: Activated Block Carbon, is a protective mechanism to safeguard the highly sensitive RO membrane.
Level 4: This is the most advanced Thin Film Composite Reverse Osmosis Membrane designed to remove dissolved impurities.
Level 5: Post Carbon cum Water Polisher, is Silver impregnated activated carbon filter to prevent the growth of bacteria at the point of use and to restore the natural taste of water.
System Recovery: 40 to 50 %
Salt Rejection: 90-95 % of the inlet TDS
Hot & Cold Water Dispenser: (With extra 8 Ltr. Jar)
2 Stage Food Grade Tank
Chilled water storage: 3.5 Ltr. (Total storage-5Ltrs.)
Hot water storage: 1.5 Ltr.
Dimensions of Dispenser
H x W x D (mm): 1055 x 390 x 390 (without extra jar)
GR. WT. (Kg.): 26 (with RO system & empty extra jar)
Height of Extra Jar: 240 mm. (Storage capacity of Jar = 8 Ltrs.).
Required Inputs For Installation
Water Inlet: Feed water terminal with inlet pressure = 0.8 to 2 Kg/cm2
Drain Pipe: For the disposal of reject water from RO System.
Electric Supply: AC ~ 230 V/50 Hz.